ISSN : 1229-6783(Print)
ISSN : 2288-1484(Online)
ISSN : 2288-1484(Online)
Journal of the Korea Safety Management & Science Vol.15 No.3 pp.51-60
DOI : https://doi.org/10.12812/ksms.2013.15.3.51
DOI : https://doi.org/10.12812/ksms.2013.15.3.51
무기체계 개발에서 시스템 안전성을 고려한 시험평가 프로세스의 개선에 관한 연구
On the Improvement of the Test and Evaluation Process in the Weapon Systems Development with Systems Safety
Received June 10, 2013; Revision Received September 4, 2013; Accepted August 28, 2013
Abstract
With the recent changes in the environment of weapon systems acquisition, the systems development isbecoming more susceptible to a variety of risks. To cope with this situation, US DoD has been emphasizingthe importance of constantly applying the test and evaluation (T&E) process throughout the whole life cycle ofthe weapon systems. In particular, the safety requirements are called for attention while dealing with systemrisks. To this end, the present paper is aimed at studying the T&E process which incorporates the systemssafety in weapon systems development. Analyzing and modeling the relevant processes has made it possible toachieve the objective. As a case study, the model results were applied to the development of unmanned aerialvehicles.
- 6 심상현 51-60.pdf1.12MB
Reference
1.John. D. Claxton(2005), Test And Evaluation Management Guide, Defense Acquisition University, 5th ed., Jan..
2.Standard Practice for System Safety, Department of Defense Standard, MIL-STD-882D, 2000.
3.Environmental Engineering Considerations and Laboratory Tests, Department of Defense Standard, MIL-STD-810G, 2008.
4.Functional Safety of Electrical/Electronic/Progra mmable Electronic Safety-related Systems, Intern ational Electrotechnical Commission, IEC Std 615 08, 2003.
5.J. H. Yoon and J. C. Lee(2007), "On an Efficient Development of the Test & Evaluation Plan through the insured Traceability of the Safety Requirements," Korea Safety Management & Science, vol. 9, pp. 89-96.
6.Test and Evaluation in Support of Systems Acqu isition, Department of the Army Pamphlet 73-1, 2003.
7.Frank Fratrik(2009), "Challenges in Software Sa fety for Army Test and Evaluation," ITEA Journal, vol. 30, pp. 409-416.
8.Viktor Levardy and Tyson R. Browning(2005), "Adaptive test process - designing a project plan that adapts to the state of a project," in Proc. 15th Annu Int Symp INCOSE.
9.T. W. Kim(2004), "On the Study to Improve in the Test & Evaluation of Weapon Systems," M.S. thesis, Dept. of Public Administration, Mokwon Univ., Daejeon, Korea.
10.B. H. Yang and H. B. Kim(2005), "Effective Test & Evaluation Method of Weapon Systems in the Change of Acquisition Environment," The Military Operations Research Society of Korea, vol. 31, pp. 93-106.
2.Standard Practice for System Safety, Department of Defense Standard, MIL-STD-882D, 2000.
3.Environmental Engineering Considerations and Laboratory Tests, Department of Defense Standard, MIL-STD-810G, 2008.
4.Functional Safety of Electrical/Electronic/Progra mmable Electronic Safety-related Systems, Intern ational Electrotechnical Commission, IEC Std 615 08, 2003.
5.J. H. Yoon and J. C. Lee(2007), "On an Efficient Development of the Test & Evaluation Plan through the insured Traceability of the Safety Requirements," Korea Safety Management & Science, vol. 9, pp. 89-96.
6.Test and Evaluation in Support of Systems Acqu isition, Department of the Army Pamphlet 73-1, 2003.
7.Frank Fratrik(2009), "Challenges in Software Sa fety for Army Test and Evaluation," ITEA Journal, vol. 30, pp. 409-416.
8.Viktor Levardy and Tyson R. Browning(2005), "Adaptive test process - designing a project plan that adapts to the state of a project," in Proc. 15th Annu Int Symp INCOSE.
9.T. W. Kim(2004), "On the Study to Improve in the Test & Evaluation of Weapon Systems," M.S. thesis, Dept. of Public Administration, Mokwon Univ., Daejeon, Korea.
10.B. H. Yang and H. B. Kim(2005), "Effective Test & Evaluation Method of Weapon Systems in the Change of Acquisition Environment," The Military Operations Research Society of Korea, vol. 31, pp. 93-106.
-
-
Online Submission
http://submission.koreasafety.or.kr
-
KSSM
The Korean Society of Safety ManagementWaste Society
-
Editorial Office
Contact Information- Tel: +82.31.336.2844
- Fax: +82.31.336.2845
- E-mail: safety@mju.ac.kr -
-
-
-
-
-
-
